Chain Link Fence Cost Per Foot: How Contractors Calculate It
/Most fence quotes are shown per linear foot, but few homeowners know what goes into that number. The chain link fence cost per foot is not a fixed rate. It is the total cost of materials, labour and site work divided by the length of your fence line. That is why two properties in Edmonton can get very different per-foot prices for what looks like the same fence. This guide breaks down how contractors calculate it, what pushes it up or down, and how to compare quotes fairly in Alberta.
- The per-foot price is the total project cost divided by the total length of fence.
- Height, wire gauge, coating, post spacing and gates change it the most.
- Longer fences usually have a lower per-foot price because setup costs are shared.
- Commercial and high security fences cost more per foot than residential fences.
- Always compare quotes line by line, not just by the per-foot number.
What "Cost Per Foot" Really Means
A linear foot is one foot measured along the ground where the fence runs. When a contractor quotes a chain link fence cost per foot, they have worked out everything the job needs, including mesh, posts, rails, fittings, concrete, gates and labour, then divided it by the total footage.
Some quotes list gates as separate line items. Others roll them into the per-foot figure. Knowing which method a quote uses is the first step to comparing them fairly.
How Contractors Calculate Chain Link Fence Cost Per Foot
Here is the basic process most fence installers follow in Edmonton and across Alberta:
- Measure the fence line and mark corners, ends and gate openings.
- Count the posts. Line posts are usually spaced up to 10 feet apart. Corner, end and gate posts are heavier.
- Price the materials: mesh, top rail, posts, tension bars, ties, caps and concrete.
- Add gates and hardware, from a single walk gate to double drive gates.
- Estimate labour based on ground conditions, access and height.
- Divide the total by the length to get the chain link fence cost per foot.
What Moves the Per-Foot Price Up or Down
Fence Height
A 6 ft fence uses more mesh and longer posts than a 4 ft fence, so the chain link fence cost per foot rises with height. In Edmonton, most backyard fences can be up to 2.0 m (about 6.5 ft) without extra approval. Our Edmonton fence height requirements guide explains the limits.
Wire Gauge and Post Size
Thicker wire and heavier posts raise the chain link fence cost per foot, but they last longer and resist damage. Residential fences often use a standard gauge, while commercial and industrial fences use heavier wire and thicker posts.
Galvanized vs Black or Coloured Coating
Galvanized chain link keeps the chain link fence cost per foot lowest. Vinyl-coated or powder-coated chain link adds a colour finish and extra protection. Black is the most popular choice. See why in our guide to black chain link fence.
Number of Corners and Gates
Every corner, end and gate needs a heavier terminal post and extra fittings. A short fence with many corners will have a higher per-foot price than a long straight run.
Fence Length
Travel, setup and equipment costs are the same whether the fence is 50 feet or 500 feet long. On longer fences those fixed costs are spread over more footage, so the chain link fence cost per foot usually drops.
Ground Conditions
Rocky soil, clay, slopes and frozen ground take longer to dig. Posts must be set deep enough to resist frost heave, which is a must in Edmonton winters.
| Fence Type | Typical Use | Per-Foot Price Level |
|---|---|---|
| Residential galvanized | Backyards, pets, gardens | Lowest |
| Residential black or coloured | Backyards with a finished look | Low to moderate |
| Chain link with privacy slats | Backyards needing privacy | Moderate |
| Commercial chain link | Businesses, schools, parking lots | Moderate to higher |
| High security chain link | Industrial yards, utilities | Highest |
Residential, Commercial and High Security Fences
Residential: Homes usually need 4 to 6 ft fences with standard gauge mesh and one or two gates. This keeps the chain link fence cost per foot at the low end.
Commercial: Businesses often need taller fences, heavier posts and wide drive gates. Learn more on our commercial fence page.
High security: Industrial sites may add barbed wire toppers, metal cladding, smaller mesh and access control. See our high security fence options.
How Privacy Slats Change Chain Link Fence Cost Per Foot
Privacy slats are woven into the mesh after the fence is built. They add material and labour to every foot of fence, so they raise the per-foot price. In return, they block most of the view into your yard and add colour. Read our guide to privacy slats for chain link fences to compare styles.
How to Compare Fence Quotes Fairly
- Check whether gates are included in the per-foot price or listed separately.
- Ask for the wire gauge, post size and post spacing.
- Confirm the post depth and whether posts are set in concrete.
- Ask if old fence removal and cleanup are included.
- Make sure utility locates through Utility Safety Partners are part of the plan.
A low chain link fence cost per foot can hide lighter materials or shallow posts. For the full picture, see our guides to chain link fence cost in Alberta and fence installation cost in Alberta.
Why Chain Link Stays Popular in Alberta
- Affordable to install: less material per foot than solid fences.
- Low maintenance: no painting or staining needed.
- Strong security: steel mesh is hard to break and easy to see through.
- Weather resistant: galvanized steel handles snow, wind and freeze-thaw cycles.
How Atlantic Fence Can Help
Atlantic Fence has installed chain link fencing since 1980 for homes, businesses and industrial sites in Edmonton, Sherwood Park, St. Albert, Spruce Grove, Stony Plain, Leduc, Nisku, Fort Saskatchewan, Beaumont and across Northern Alberta. We install galvanized and powder-coated chain link, privacy slats, high security fencing and gates.
We measure your fence line on site and give you a free, itemized estimate, so you can see exactly what goes into your per-foot price. Atlantic Fence is COR certified and a member of the Alberta Construction Safety Association.
The Bottom Line on Chain Link Fence Cost Per Foot
The chain link fence cost per foot reflects your fence height, gauge, coating, gates, length and ground. Long, straight, galvanized fences sit at the low end, while tall security fences with many gates sit at the high end. A free on-site estimate gives you the real number for your property.
Call Atlantic Fence at 780-450-6628 or request a free estimate today.
Get a Free EstimateFrequently Asked Questions
How is chain link fence cost per foot calculated?
To work out chain link fence cost per foot, contractors add up the cost of materials, gates, labour and site work for the whole project, then divide it by the total length of the fence line. Height, wire gauge, coating, number of corners and gates, and ground conditions all change the result, so every property gets its own per-foot price.
Is chain link fencing cheaper than wood fencing?
In most cases, yes. Chain link uses less material per foot, installs faster and needs no staining or painting. Wood fences cost more to build and need regular upkeep. Atlantic Fence installs chain link fencing only, including galvanized, powder-coated and privacy slat options.
How long does a chain link fence last in Alberta?
A properly installed galvanized chain link fence can last 20 years or more in Alberta. Powder-coated fences can last even longer. Setting posts below the frost line and checking ties and fittings now and then helps the fence handle snow, wind and freeze-thaw cycles.
Does privacy slat installation increase fence cost?
Yes. Privacy slats add material and labour to every foot of fence, so they raise the per-foot price. They also block most of the view into your yard and add colour, which makes them a popular upgrade for backyard chain link fences in Edmonton.
Is professional installation worth it?
Yes. A professional installer sets posts at the right depth for frost, stretches the mesh to the right tension and hangs gates so they swing and latch properly. This helps the fence last longer and avoids repair costs that often come with a poorly installed fence.
